Unit
7, Callywith Gate Ind. Est., Bodmin, Cornwall. U.K. PL31 2RQ
Tel 44 (0)1208 77886 Fax 44 (0)1208 77116
Tel 44 (0)1208 77886 Fax 44 (0)1208 77116
| MicroClassifier - On-line Slurry Fine Particle Size Analyser | |||||
| INSTALLATION | |||||
| Dimensions (W X H X D, mm) | Services |
|
|||
|
Measuring
Unit 600
X 900 X 520
|
Water | Clean drinking-quality soft water, positive head. 10 l.p.m. peak flow, ~50 l.p.m. average. | |||
| Control Unit (PC housing) 600 X 750 X 620 | Electricity |
110
- 120 V a.c. at 10A |
|||
| Units may be wall-mounted, or floor-mounted on frame, 1400 X 600 footprint. (Pictures) | Sample line | Single 4 or 6 mm flexible tube per stream. Maximum length 10m. Sample source pressure <1 Bar preferred (consult). | |||
| Control/PLC | Drain | Low level, no back-pressure. | |||
| Up to four floating 4 - 20mA outputs available, assignable to point p.s. values (% finer) or 'D' values. | Dispersant | To suit material/process. Metered dosing of sample. | |||
| Analogue outputs may be multiplexed on pairs of current loops for multiple ( >4) values. | |||||
| Profibus DP (TM) interface available; other digital standards possible. | |||||
|
|
||
|
Unit
7, Callywith Gate Ind. Est., Bodmin, Cornwall. U.K. PL31 2RQ
Tel 44 (0)1208 77886 Fax 44 (0)1208 77116 |
||